|
- To ensure uniform pressure distribution, the thickness of the . . .
To ensure uniform pressure distribution, the thickness of the foundation, is (A) Kept uniform throughout (B) Increased gradually towards the edge (C) Decreased gradually towards the edge (D) Kept zero at the edge The correct Answer Is (C) Decreased gradually towards the edge
- Uniform flow occurs when | Civil4M
Uniform flow occurs when (a) the direction and magnitude of the velocity at all points are identical (b) the velocity of successive fluid pai-ticles, at any point, is the same at suc¬cessive periods of time (c) the magnitude and direction of the velocity do not change from point to point
- Uniform flow occurs when | Civil4M
Uniform flow occurs when (a) the flow is steady (b) the flow is streamline (c) size and shape of the cross section in a particular length remain constant (d) size and cross section change uniform¬ly along length (e) flow occurs at constant fate The correct Answer Is (c) size and
- Work Procedure Specifications for Internal and External . . . - Civil4M
Wetting shall be uniform To avoid cracks at the junction of concrete with masonry work, the plaster shall be reinforced at such junctions by fixing standard wire mesh (6 x 6 x 6 6) as directed by the Engineer-In-Charge The wire mesh shall overlap concrete and masonry surface by at least 150mm
- In Resource Leveling - Civil4M
In Resource Leveling - (a) Total duration Of Project is Reduced (b) Total duration Of Project is Increased (c) Uniform Demand of Resources is achieved (d) Cost of Project is Controlled The correct Answer Is (c) Uniform Demand of Resources is achieved
- Why we do PCC before footings? - Civil4M
In any construction project, after excavation, PCC is done before footing Why we do PCC at the base of footing, PCC have lower strength than concrete and it is placed at base?
- A one dimensional flow is one which - Civil4M
A one dimensional flow is one which (a) is uniform flow (b) is steady uniform flow (c) takes place in straight lines (d) involves zero transverse component of flow (e) takes place in one dimension The correct Answer Is (d) involves zero transverse component of flow
- Checklist for Internal Painting Works - Civil4M
Checklist for Internal Painting Works Checklist for internal painting works consist of following points; Material Approved Make Type Shade Surface Prepared Preparation of Paints primer Hardware installed are covered Application of Primer Application of Putty Scrapping and Application of
|
|
|